Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

Hydrophobic Monomers Recognize Microenvironments in Hydrogel Microspheres during Free-Radical-Seeded Emulsion Polymerization

The three-dimensional structure of nanocomposite microgels was precisely determined by cryo-electron micrography. Several nanocomposite microgels that differ with respect to their nanocomposite structure, which were obtained from seeded emulsion polymerization in the presence of microgels, were used as model nanocomposite materials for cryo-electron micrography. The obtained three-dimensional segmentation images of these nanocomposite microgels provide important insights into the interactions between the hydrophobic monomers and the microgels, that is, hydrophobic styrene monomers recognize molecular-scale differences in polarity within the microgels during the emulsion polymerization. This result led to the formation of unprecedented multi-layered nanocomposite microgels, which promise substantial potential in colloidal applications.     

控温相变免疫分析测定雌酮

通过热引发聚合与氧化还原引发聚合，合成水凝胶，作为雌酮全抗原(E1— BSA)载体；以异硫氰基灾光素标记雌酮的单克隆抗体(McAb)作为示踪剂，建立了控温相变竞争免疫分析测定雌酮(EI)的方法并应用于分析血清样品。实验表明：以热引发聚合合成的水凝胶为载体的荧光免疫分析方法具有更高的灵敏度，它的线性范围为10-700μg/L，检出限为1μg／L(n=10，3倍空白)。经水凝胶性质的比较(包括LCST、非特异性吸附、抗原与抗体反应时间及固定化抗原活性)，证明了热引发聚合的水凝胶较氧化还原引发聚合的水凝胶更适合于作为免疫分析的载体。     

Hydrogel nanonetworks with functional core-shell structure

Nanohydrogel particles of poly(acrylonitrile-co-N-isopropylacrylamide (p(AN-c-NIPAM)) were synthesized using a microemulsion polymerization technique. Highly monodisperse nanohydrogel particles e.g. 50-150 nm, and various morphology such as core-shell and connected beads were obtained. It was shown that the shell thickness and the size of particles can be tuned by the monomer concentrations and their ratios as well as by the utilization of different crosslinkers. The hydrophobic core monomer, AN was converted to amidoxime groups to increase the hydrophilicity of the nanogels which provide more hydrophilic character and impart new functionality to the nanonetwork. Transmission electron microscopy (TEM), and dynamic light scattering (DLS) techniques were employed for the particle size characterizations. The amidoximation reaction was confirmed by FT-IR spectroscopy.     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

形状记忆聚氨酯研究进展

对形状记忆聚合物(主要以聚氨酯为例)的总体研究概况、合成方法、表征手段、数学模型等方面进行了综述。     

Bestimmung wasserlöslicher Polyelektrolyte in Polyurethan-Dispersionen

Zusammenfassung Die Bestimmung wasserlöslicher Polyelektrolyte, die bei der Synthese segmentierter Polyurethanionomerer entstehen, erfolgte durch konduktometrische und potentiometrische Titrationsverfahren nach Abtrennung des Serums durch Ultrazentrifugieren oder Ausfrieren des Polymeren bzw. Abtrennung der wasserlöslichen Elektrolyte mit einem gemischten Ionenaustauscher. Diese Elektrolyte enthielten abhängig von der Rezeptur zwischen 25 und 72% der vorgegebenen Ionenkonzentration. Unterstellt man glatte, kugelförmige Latexpartikeln, so beträgt die Fläche pro festhaftende ionische Gruppe nur 60–170 Ų, wodurch eine erhebliche gegenseitige Beeinflussung der Ionen resultiert.Herrn Prof. Dr. Ing. Dr. h.c. mult. H. Zahn zum 65. Geburtstag gewidtmet (O. L.).     

Non-isothermal kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel</o:p>

Summary Kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel was investigated using methods of non-isothermal thermal analysis. Methods of Kissinger, Coats-Redfern, Van Krevelen and Horowitz-Metzger were applied for determination the kinetics parameters: activation energy (E), pre-exponent (lnA) as well as the kinetics model ƒ(69) for the process of hydrogel dehydration under different heating rates. An existence of good agreement between determined values of kinetic parameters (Eand A), which were obtained applying different methods under the same heating rate. Functional relationship between changes of kinetic parameters of dehydration and changes of heating rate was established. An existence of compensation effect is accepted and explanation of compensation effect appearance during the hydrogel dehydration is suggested.     

一种具有二维状组装体结构的氢键结合超分子水凝胶的制备

近年来,基于低分子量有机凝胶因子(low molecular mass organic gelators)[1]形成的超分子水凝胶得到了广泛关注.     

SYNTHESIS, CROSSLINKING MECHANISM AND PROPERTIES OF A POLYACRYLATE/POLYURETHANE COMPOSITE COATING

A polyacrylate/polyurethane (P(A) / P(U)) composite coating has been prepared bycrosslinking an acetoacetylated polyacrylate with a vinylic group terminated polyurethaneat room temperature. A model Michael reaction between ethyl acetoacetate (EAA) andmethyl acrylate (MA) was designed to study the crosslinking mechanism. It was foundthat the two active hydrogen atoms in acetoacetyl group can both add to vinylic groupsand the yield of mono- and bis-adducts are much affected by the molar ratio of acetoacetylto vinylic groups. Higher crosslinking degree and better properties could be obtained withdecreasing the molar ratio of the two active groups from 1/1 to 0.6/1 in the compositecoatings.